Zebra

Recommended scanner settings

Zebra TC21/TC26 will also apply to TC22/TC27

If Tixly Scanner app does not scan using barcode reader, check the following settings on the device

• Navigate to settings and tap on Data Wedge
• Click on the 3 dots in the top right corner and select New Profile
• Create a new profile and open the new profile
• Press Associated apps and then press the three dots at the top right and choose New app/activity to associate the profile with the Tixly scan app
• From the list of apps, choose com.scanApp and from the list of activities, choose *
• Then press the back button to return to the profile.
• Scroll down to find Intent output and confirm it's enabled
• The intent settings should be:
  • Intent action: com.zebra.dwintents.ACTION
  • Intent category: android.intent.category.DEFAULT
  • Intent delivery: Broadcast intent
• Keystroke output should be disabled

Under Barcode input > Configure scanner settings > Scan params configure the following: 

• Decode Haptic Feedback
• Decode LED Notification

To make use of the built in notification sounds on the app which differs for a successful and failed scan

• Navigate to the device Settings and tap on Sound.

• Use the sliders to set the volume and set Media volume to high and the others to low.

Also check:

• Navigate to settings and tap on Data Wedge
• Scroll down to Keystroke output and confirm it's enabled
• Go in to Key event character
• Enable the following:
  • Send Characters as Events
  • Send Enter as String
  • Send Control Characters as Events
• Now go back and scroll to Basic data formatting and check Enable, Send data, Send ENTER key
• Scroll down to find Intent output and confirm it's enabled
• Then go down to "Basic data formatting" and check "Enable, Send data"

Screen locks with very short intervals 

• Navigate to the settings on the unit 
• Then go to Settings → Display → Screen Timeout
• Here you can adjust the time that you want the scanner to be "unlocked"