Wepoy

DT40/S95

The setup of Wepoy S95 is identical with other scanners, but looks different in some older Android versions.

Under settings, you get the possibility to log in with your Google account, and log in to Mobile network. This is not necessary to scan tickets in Tixly.

Scanner settings

• Make sure the scanner has a connection to wifi. The network should be an own dedicated network so others will not use the same bandwith and capacity of the network. This may interfere with the scanning.
• Swipe down top to bottom to get to the settings.
• Press the wheel to get to the rest of the setting.

• Screen: Set Sleep mode to 30min or Never
• Click Scanner Settings and set the following settings:

• Important: Read more about the 3 Triggering Modes here:
• Triggering Modes will affect scanning and how scanning will be done when you press one of the three big scan buttons.

• Triggering Modes can be chosen with your own preferences.
• Host is used if the scan user are able to scan when the button is pressed.
• Pulse is used this way: Press the button and the scan function is activated, and will scan automatically when the scanner locates a barcode or qr-code.
• Continuous should not be used, as it will draw a lot of energy from the battery.

• You can also set scanning sounds if you wish.

• Scanner sounds can be edited here as well

• Set the correct date and time: